SMART AGITATORWASHING SYSTEMS
Manual washing does not scale — the bags, the ice, the guesswork on temperature and agitation. The Smart Agitator takes that off your hands: one automated system that runs mechanical separation with tight control over temperature and the agitation cycle, from small batch to full production.
Wash Gear Built to Survive a Production Schedule
The W.E.S. Smart Agitation System drops the wash bags and the ice and hands you control over the agitation cycle instead. It is built for shops that wash every day and cannot afford the manual bag-and-ice labor — one automated system that holds its temperature and its cycle under a real production schedule and scales from small batch to the 290-gallon BOSS.
Designed, built, and assembled by one team in Lake Forest, California — 304 stainless on the outside, 316 stainless on the wetted internal components where corrosion resistance matters most — so the shop that engineers it is the same shop that answers when you call about it. That's been the arrangement since 2016.
The Smart Agitator Lineup
Four vessel sizes on one control platform — the same temperature and agitation control from the entry vessel to the 290-gallon BOSS, so a shop can start small and scale without relearning the system.
| System | Vessel capacity | Construction | Best fit |
|---|---|---|---|
| Smart Agitator 50 | 50 gallon | 304 exterior / 316 wetted stainless | Small batch & R&D |
| Smart Agitator 85 | 85 gallon | 304 exterior / 316 wetted stainless | Growing production |
| Smart Agitator 132 | 132 gallon | 304 exterior / 316 wetted stainless | High-volume runs |
| BOSS 290 | 290 gallon | 304 exterior / 316 wetted stainless | Industrial flagship |
Configure a Smart Agitator for your facility →
Smart Agitator
W.E.S. Smart Agitator
Water Extraction System
A different way to run ice-water mechanical separation. The Smart Agitator drops the wash bags and ice and gives you control over the wash process. It runs from small batches to full production.
- No bags or ice prep
- Pneumatic sphere lock & release system
- Scales from small batch to industrial
W.E.S. Software
Control System
Run the wash from one interface. It is straightforward to operate and lets you set every parameter of the wash yourself.
- One-Button Start — kick off a wash cycle without a long setup
- Custom Parameters — set speed, temp, and cycle intensity
Clean-In-Place Between Runs — No Teardown
The built-in CIP system cleans the vessel in place, so you cycle from one wash to the next without breaking the unit down by hand — the equipment stays ready when the volume does.
Why 304 Outside and 316 Inside
304 stainless on the outer structure keeps the frame strong and clean; 316 stainless on the wetted internal components resists the corrosion that constant cold-water contact causes. You get the right grade where each one earns its cost — not a single-grade shortcut.
Spin Flow Vibration Sieve
A multi-sieve station separates fine material from source material and recovers more output. Explore the Separator →
Adjustable Agitation
Set wash speed and intensity with programmable cycles for different materials and batch sizes.
Automation
Handles 1–100 lbs of fresh material per cycle. It works for small runs and large ones.
Faster Batches
Run several wash cycles per shift when the volume calls for it.
Cold Held Steady, First Pull to Last
Holds cold-water wash temperature steady across the whole cycle, so the last batch of the day washes the same as the first instead of drifting warm as the ice melts.
Modular — Fits the Facility You Have
Add or remove components as your volume changes. Parts swap out to fit a new build or drop into the facility you already run, so the system grows with the shop instead of forcing a rebuild.
The 290-Gallon BOSS — Scale Without Losing Control
The BOSS System is the largest in the line at 290 gallons. It moves real volume without handing back the temperature and cycle control that makes the wash consistent — big capacity that still washes like your best small batch.
Load Material
Load fresh material into the agitation vessel through the pneumatic lock system
Set the Cycle
Dial in your wash parameters on the 7" touchscreen
Run the Wash
The system runs the programmed agitation cycles for you
Collect & Clean
Pull your output through sieve separation, then run the CIP clean
Build Your Wash System
Pick your capacity, system package, power, and add-ons in about a minute. We send back a quote with pricing and lead time.
STAINLESS,
END TO END.
Stainless-steel wash equipment for agitation, chilling, and separation. Built and assembled in California to run production shifts.
Picture the wash room at hour six of a production shift: no floor covered in dripping bags, no scramble for more ice, no crew guessing at temperature. One operator loads the vessel, dials the cycle on the touchscreen, and starts the next batch while the last one runs. The water stays cold, the agitation stays consistent, and the CIP cleans it down between runs — so the shop runs on a schedule instead of on muscle.
Ready to grow your operation?
Shops across the country run Access Rosin gear. Talk to an engineer and get pricing and lead time.