ACCESS ROSIN FLUID PRESS
Priced out of a real press and stuck with a toy? The FLUID gives you a 20-ton single-acting hydraulic press at just 34 lb that fits on any workbench. Pair it with a hand pump and put out serious rosin without a serious budget.
Twenty tons on parchment: the FLUID's drip, up close. Small footprint, real pressure.
The S2 legacy —
where the FLUID began
Eli walks the original S2 hydraulic press. The FLUID carries that same 20-ton DNA in a 34-pound package.
34 POUNDS.
20 REAL TONS.
A press small enough to carry and strong enough to mean it. No compressor, no dedicated station, no serious budget.
Single-Acting Hydraulic
No compressor to buy and no air line to run. A single-acting BVA cylinder delivers controlled 20-ton pressure from a hand pump (sold separately), so you can start pressing in a spare room the day it lands.
Portable Design
At 34 lb one person carries it between rooms or loads it in the truck for an event. It fits on any workbench, so it never ties up a dedicated station. The S-Series handles small-batch waterfall processing with precision. Watch a 60-second demo →
PID Temperature Control
Two PID controllers with a digital readout let you set each platen on its own, so the press you dial in today repeats the same tomorrow instead of drifting on you.
Limited Frame Warranty
Every FLUID carries a 1-year limited warranty on the frame, plates, heating, and electronics, so an entry-price press doesn't mean an entry-price gamble.
WHERE FLUID FITS
SPECIFICATIONS
| Max Force | 20 tons: single-acting BVA hydraulic cylinder |
|---|---|
| Pump | Single-acting hydraulic hand pump, sold separately (BVA P352 compatible) |
| Plates | Trapezoid heat plates, shaped to maximize dwell and processing time |
| Temperature Control | Dual-plate PID controllers with fuzzy logic · K-type thermocouple |
| Collection Cavity | 6", collect into a jar or onto parchment |
| Size / Weight | 12" L × 14" W × 24" H · 34 lb, portable |
| Power | 110–120V, 1φ, 60 Hz, 15 A input / 3.5 A output |
| Finishes | Red · Blue · Black · Aluminum (polish) |
| Price | $3,999, ships from Lake Forest, CA |
| Warranty | 1-year (frame, plates, heating & electronics) |
Compare the lineup
Watch the collection
path run
Post-melt separation on an Access Rosin press: the same collection physics the FLUID's cavity is built around.
FLUID XL Configurator
FLUID XL Configurator
In Stock · Ships FastSTART PRESSING
Our entry-level press. In stock and ready to ship from California.
Pair your FLUID with a complete wash system. See the 132-gallon WES →
Recommended Consumables
Off the heat, into the cylinder.
Cone plates and a central drain pull your extract off the hot plate the moment it flows, down through the Flow Control bag and into a front-mount collection cylinder seated against the plate. Less time on the heat, less surface open to the room.
One shop,
the whole line
Wash, press, dry, and resupply — every stage built and supported by the same Lake Forest team. Spec it as a system, not a pile of parts.
Build a System
Craft-grade rosin, benchtop scale.
Picture it landing on your bench: clear the box, dial each plate on its own PID, pull the hand pump to 20 tons, and you're pressing serious rosin in a spare room the same afternoon. No compressor, no air line, no dedicated station tied up.
Solid build, honest price, in stock and ready to ship from the same Lake Forest team that builds the wash line and the flagship. Grow into it, not out of it.
To install this Web App in your iPhone/iPad press
and then Add to Home Screen.
