Solventless separation uses mechanical means — heat, pressure, ice and water — to separate the fine material from the source material without chemical solvents. The output carries no residual solvent because none was ever introduced.
Why operations choose it
No solvent to remove. Nothing has to be purged, tested for or documented, which removes an entire category of process risk and the equipment that manages it.
Fewer contamination routes. Without solvent handling, the process has fewer inputs that can introduce contamination and fewer steps where it can happen.
Simpler facility requirements. No solvent means no solvent-rated room, no recovery equipment, and a materially simpler set of safety and compliance obligations.
The three mechanical routes
Pressing. Heat and pressure applied to source material or to washed material, producing rosin directly. The variables are temperature, pressure and time, and the bag controls the flow path.
Ice-water washing. Agitation in ice water separates the fine material from the source material, which is then filtered through a graded bag set and dried. The variables are temperature, agitation intensity and duration.
Dry sieving. Dried source material is worked across graded screens and the fine material is collected mechanically. The simplest route, and the one most sensitive to input condition.
Each produces a different input for the next stage, which is why press settings differ so much by material — see the packing reference for the working numbers.
Where our equipment fits
The Smart Agitator Water Extraction System handles the washing stage at production scale, with controlled agitation and defined cycle parameters so the process is repeatable rather than operator-dependent. It is available in several sizes so the same process runs at different throughputs.
Solventless is not a new idea. What has changed is that the equipment is now precise enough to run it as a process rather than a craft.