Access Rosin's Flow Control technology, protected under US Patent No. 11,511,465, addresses a stage of the process that most equipment leaves to chance: what happens to the output between the plates and the container.
What it does
It directs the flow. The output moves evenly into the collection cavity rather than spreading unevenly across a plate, which reduces uneven pressure and temperature across the press.
It cuts handling. Directing the flow precisely removes most of the scraping and transferring a flat plate requires. Every handling step you remove is output you do not lose and a contact opportunity that does not happen.
It scales without changing the result. The same geometry works at a larger throughput, so adding capacity does not mean re-learning the process.
Why collection geometry affects what ends up in the jar
The output leaves the press hot and fully liquefied. That is the point in the process where it is most vulnerable, and the collection path determines how long it stays that way.
Less time on the heat. The output falls from the plates directly into the collection container rather than spreading and sitting on a heated surface. Less time at temperature means less loss of the lightest volatile fractions — the ones that leave first.
Less exposure. A directed stream into a container has a far smaller surface-to-volume ratio than a thin film across parchment, so there is less surface presented to air.
Separation you can see. Because the material separates as it melts and flows, operators can observe the fractions coming off across the run, and use that to refine the recipe rather than guessing at it.
The economics
Cost per gram. Directing the flow reduces the labour in each cycle and the output lost to scraping and transfer. Both move cost per gram in the same direction.
Throughput. A streamlined collection path shortens the gap between cycles, so a facility completes more cycles per shift without adding people.
Consistency. The same geometry produces the same flow path every cycle, which is what makes a process repeatable across operators and shifts.
What we are not claiming
Deliberately, and it is worth saying plainly: the statements above are qualitative and mechanism-based. Quantified comparisons — output deltas, cost-per-gram reductions, throughput gains against a named alternative — need controlled testing at matched settings, and we would rather publish those numbers than assert them.
What is not in question is the mechanism. The flow path is the least engineered stage of most presses, and it is the stage where the output is most exposed.