Equipment is bought once. Consumables are bought every month, which makes them the part of a solventless line that quietly decides what a gram costs to produce. They are also the part most often estimated rather than counted.
What the process consumes
Rosin bags. They hold the material through the press and set the flow path out of it. They are cheap individually and the largest consumable line by volume, because they are discarded after a small number of uses. Micron and size are process choices, not cost choices — see the packing reference for the working numbers.
Parchment. It receives the rosin and has to release it cleanly. Quality matters more than the unit price here: a sheet that tears or sticks costs you the collection, not just the sheet.
Wash bags. Used in the washing stage to separate the fine material by micron. They last far longer than rosin bags, but they tear under load or on a sharp edge, so they are an occasional rather than a recurring line.
Everything else. Gloves, hair nets and jars, consumed continuously. Freeze dryer trays and lids, which are durable but wear, and should be budgeted as slow consumables rather than assets.
The part people get wrong
Consumable cost is usually estimated per gram of output. It is not incurred per gram — it is incurred per press cycle, and that is the whole difference.
Bags and parchment are spent when a press runs, whatever it is holding. So the cost per gram is set by how much material one cycle can hold. A press taking a small charge spends a set of consumables on a small output; a press taking a much larger charge spends a comparable set on a much larger one. Run the same monthly volume across several small presses and you pay for several sets of consumables, several setups and several operators' time, for the same grams.
This is why consolidating presses lowers the bill even when the larger machine costs more: the consumable line scales with cycles, and fewer, larger cycles is fewer consumables.
What that looks like on a real batch
Worked from the Smart Agitation Water Extraction System 50 Gallon over a 20-day month, 8 hours a day, 38 lbs per cycle and 4 cycles a day:
input 3,000 lbs fresh-frozen (600 lbs dried) total mass 1,362,000 g washed material, wet 340,000 g washed material, dried 54,500 g at 4% · 68,100 g at 5% rosin 41,000 g · 51,000 g (75% washed material to rosin)
And the consumable bill for that batch, one larger press against six smaller ones:
| KWÄD | traditional presses | |
|---|---|---|
| Number of presses | 1 | 6 |
| Grams per press | 240 | 40 |
| Grams per bag | 60 | 20 |
| Bag size | 20" sq. | 12" sq. |
| Press count | 227 | 227 |
| Rosin bags per press | 8 | 4 |
| Parchment per press | 4 | 2 |
| Rosin bag cost each | $1.00 | $1.00 |
| Parchment cost per pouch | $1.49 | $0.65 |
| Rosin bag cost per batch | $1,816.00 | $5,448.00 |
| Parchment cost per batch | $1,352.92 | $295.10 |
| Total bags per batch | 1,816 | 5,448 |
| Total cost per batch | $3,168.92 | $5,743.10 |
| Cost per gram produced | $0.06 | $0.63 |
| Saving per batch | $2,574.18 | — |
The parchment line is the one worth reading twice: the KWÄD's pouches cost more each and more per batch. The bag line is where the money is, and it is the press count that drives it.
Where our equipment fits
The KWÄD press takes a larger charge and presses several bags in one cycle under a single pressure and temperature. The wider-mouth rosin bags and the pre-folded parchment pouches remove handling from each cycle rather than cost from each sheet, which matters more at volume than the unit price does.
Forecasting
Hold at least a month of consumables. A line that stops because the parchment ran out has lost far more than the parchment, and the lead time on a consumable is never when you need it to be.